TSDZ2 48v 500w - VLDC 5 w/ Throttle, E-brakes, Light Cables

New product

- 48v 500w TSDZ2-T (w/ mounting hardware/tools)
- 42T Chain Ring (34T or 52T available as well)
- VLDC-5 display (w/ ext. button panel, USB charge port)
- Right Side Thumb Throttle AND E-Brakes
- Speed Sensor w/ Spoke Magnet
- TWO Light Connections w/ long wires

Optional Upgrades Available (dual chain rings / adapters / stronger internal gearing)

More details

$ 320.00

More info

TSDZ2-T - 48v 500w

Torque Sensing Mid-Drive Motor by TONGSHENG

Smooth. Responsive. Light. 

     This motor is newer to the market, and has not had as much publicity as the BBS series. The main difference, is that the BBS series assist works with 'speed sensing', or merely relies on a sensor that is tripped by a series of magnets that spin around when you pedal. HOWEVER, the TSDZ series motors are activated by a 'smart, dual sided torque sensing mechanism', which also has multiple assist levels. This makes for a true 'SUPERHUMAN FEEL', because the torque sensor can tell how hard you are pushing, and signals through the controller to the motor to provide corresponding level of assist! This is a GREAT feeling, and usually only available on much higher end ebikes.

     We use the new type speed sensors, and include a split 'Y' adapter, to hook up a headlight, and taillight, which you can control from the display/cockpit! Also, our VLDC-5 unit comes fully loaded with throttle, and e-brakes. The VLDC-5 display also has a usb port, to charge your mobile device!


Custom, Upgradeable

     Double Chainring (34/42, or 42/52) to upgrade from the 'stock' Single 42T w/ Cover. Single 34,42, or 52 chain rings are available as well.

 

     104 BCD, and 130 BCD Adapters. These can mount a chainring on both sides, as with the 'stock' TSDZ2 adapter, to make a 'dual chainring. However, you will have to provide your own chainrings for these adapters.

 

     Metal Gear (stronger, but louder) to upgrade from the 'stock' Blue Plastic (see our other listings) if you ride aggressively in low rpms, hilly areas, or haul a trailer or heavy load.


----------------------------------------------------------------------------------------------

FEATURES:

  • Very Fast and Easy Assembly, Plug and Play Wiring. (Includes all installation hardware and tools. Can complete motor installation in 5 minutes, allowing more time to run wiring to the speed sensor, as well as to the handlebars/cockpit, fastening all wires tight in place, for a clean conversion, with no loose hanging wires.)- Compact (smaller than BBS, almost completely hidden on drive side)
  • Powerful 500w (great hill climbing ability and power to weight ratio)
  •  Lite-Weight: 3.6Kg or 8lbs (BBSHD 68mm = 5.4kg or 12lbs) 
  • VLCD-5 Display (w/ Nightlite for riding in dim areas, and setting to calibrate for any wheel size)
  • Detached 'button control panel' (for stable setting adjustments at your fingertip, on the fly)
  • Power Assistant Ratio: 36%~300% (4 levels of assistance)
  • 'Stock' Limited Speed: 25Km/h (can adjust to 45Km/h in settings, also can switch to MPH display)
  • High efficiency torque sensing mid drive, utilizes the drivetrain gearing, for lower battery power consumption.


INSTALLATION:

  1. Push motor BB axle into BB tube,the exxposed axle length on left side is 11mm(Put securing plate onto BB axle, Put 2 washers between motor and securing plate,Tighten the securing plate and the motor with two m5*6 screws).
  2. Screw the M33.5 nut onto the BB axle,do not tighten the nut.
  3. Install the fixing block onto the motor with m8*40 bolt, do not tighten,Using a m8*45 bolt and the hang-plate to tighten the fixing block and motor.
  4. Tighten the bolt with 40nm torque force,tighten with affiliated wrench by over 40n.m torqure.
  5. Using m8*14 bolts to install the arm-cranks.the locking torque is over 40n.m.

----------------------------------------------------------------------------------------------
 
HOW DO I KNOW IF THE MID DRIVE CONVERSION KITS WILL FIT MY BIKE, AND WORK WITH MY BATTERY?

BICYCLE COMPATIBILITY: The Mid Drive Kits are designed to fit bikes with a 68mm (2.68 in.) to 73mm (2.87 in.) wide bottom bracket shell and 35mm inside diameter. This encompasses the vast majority of bikes excluding some newer high end bikes with an Integrated Bottom Bracket. More than 95% of bikes with the correct measurement BB fit this without a problem. The only real problem we have ran into, is chain line issues, which is common for electric conversions, but with a dual chain ring, you can usually shift the front accordingly, to at least mostly eliminate any alignment issues when riding. The chain line on this is actually better than the BBS units in our experience, and we have all the adapters for any modification. The only real problem we have ran into, is chain line issues, which is common for electric conversions, but with a dual chain ring, you can usually shift the front accordingly, to at least mostly eliminate any alignment issues when riding. The chain line on this is actually better than the BBS units in our experience, and we have all the adapters for any modification!

*note - we want to mention, that when choosing a chain ring (otherwise we send stock 42T), you should take into consideration that the assist on this unit, operates on a torque sensor. Usually we would not recommend a 52T, but I would definitely consider that for this unit over a 34T, personally (make sure your bike has clearance, or get the dual and put it on the outside)... this makes it activating the more powerful levels of assist a little easier due to the way the the torque sensor works.

BATTERY COMPATIBILITY: A 48v BATTERY WITH 20A CONTINOUS DISCHARGE CURRENT IS REQUIRED TO POWER THIS MOTOR PROPERLY (we can supply this if needed, see our other listings) * note - this system is only compatible with standard 48v batteries. It is NOT compatible with 52v batteries charged higher than 54.6v. The display will work, but the motor does not work past 54.6v, which is the highest charge for your standard 13s li-on, 48v pack. If any clarification is needed, feel free to contact us, thanks*

We here at ReCycles have done extensive work and research on these units, and offer an exclusive custom made model, more powerful, and with features and optional upgrades unavailable anywhere else. Remember, we love this stuff ourselves, and although we usually are into 'higher power EV'... we LOVE the torque sensing on these units, and the feeling of 'super-pedaling' that you simply cannot get on any ebike system that does not have a quality torque sensor. This one sensing torque on BOTH sides, and is quite smooth.

We offer supreme support for these units, stocking replacement supplies, and offering extensive expertise in repair/service. Also, these little things are light, and easy to remove/re-install if you ever need to take one off, or even send one in for maintenance, it is not that  big of an issue, compared to say, a heavy hub motor in a whole wheel.

There is a lot of 'iffy' info out on the TSDZ2 around the internet. We have done THOROUGH testing ourselves, and have been in touch directly with the manufacturer to get to the bottom of it. We have software programming capabilities for the controller itself, not just hardware repair/replacement capabilities. There is an ongoing 'thread' on a very informative forum 'endless-sphere' which you could go to for information. Of course, I would be happy to answer any questions as well!



The battery link below is one example of a compatible battery:
http://recycles-ebike.com/home/58-lithium-ion-bottle-ebike-battery-48v-145ah-with-charger-fit-48v-500w-750w-1000w-bafang-bbs02b-motor-0712073372167.html

Accessories